Rust removal tool for stainless steel flange

1. file: flat, triangular and other shapes, mainly used to remove welding slag and other prominent hard objects.
2. Wire brush: it is divided into long handle and short handle. The end face of the brush is made of thin steel wire, which is used to remove the rust and residue left after scraping by other tools. The other kind of steel wire bundle with steel wire at both ends is used for cracks and holes.
3. shovel knife: the blade length is about 50~100cm, generally made of wooden handle or hollow steel pipe; Blade width 40mm~20cm, the material is generally carbon steel or tungsten steel. It is mainly used to remove rust, oxide skin, old coating and dirt from the plane.
4. rust hammer: usually on both sides of the blade, one side is "one" type, the other side is "│", knife edge about 20mm wide, mainly used to knock out rust, loose oxide and old coating surface. There is also a pointed hammer for cleaning rust from deep depressions.
5. scraper: commonly known as "scraping", a flat, a curved, both edges, made of carbon steel, about 20cm long, flat role with shovel knife, elbow used to remove Angle iron reverse, rust and dirt; There is also a pointed scraper with a pointed end to remove rust and dirt from crevices.

The above is stainless steel flange derusting tool, we can understand, if there is a need for a friend, you can consult DHDZ.