Development Overview of Processing and Manufacturing Technology for Pipes and Pipe Fittings


Pipes are critical basic components in the industrial sector and are widely used in high-end equipment fields such as aerospace, shipbuilding, energy and chemical industry, and automobile manufacturing, known as the “artery of industry”. With the digital transformation of the global economy and the advancement of carbon neutrality strategies, the market demand for high-performance pipes is growing continuously, with higher requirements especially in lightweight design, high strength and corrosion resistance. Based on recent research findings, this paper systematically reviews the market status, production technologies, simulation methods and future challenges of pipes made of stainless steel, copper alloys and other materials, so as to provide references for the industry.

Analysis of the Development of the Global Pipe Market

General Overview of the Global Pipe Market

According to the latest market research reports, the global high-end pipe market is expected to grow at an annual rate of 6.5% to USD 285 billion by 2030. North America and Europe account for more than 40% of the global market share, while the Asia-Pacific region, especially China, registers the fastest growth with an annual growth rate exceeding 9%.

Analysis of the Stainless Steel Pipe Market

Thanks to its corrosion resistance, high strength and other merits, stainless steel serves as a key global basic material. In 2022, the global stainless steel market reached approximately USD 130.6 billion. China dominates the global stainless steel industry, accounting for over 62% of the global output. Its output reached 30.46 million tons in the first three quarters of 2025, maintaining a large-scale net export trend with a continuously expanding trade surplus. Enterprises including TISCO and Tsingshan Holding Group lead the industrial development. Stainless steel is widely applied in construction, transportation, high-end manufacturing and other sectors (Table 1). Nevertheless, China still faces shortages in the supply of high-end products for top-tier applications such as superalloys for aero-engines and ultra-precision special strips.

Table 1 Segmentation of Application Fields

Aluminum Tube Application Fields

Analysis of the Copper Alloy Pipe Market

In 2023, the global copper pipe market (Table 2) reached a scale of USD 28 billion. Among the end-use sectors, refrigeration and air conditioning accounted for 45%, building water supply and drainage 30%, and industrial applications 25%. As the world’s largest producer of copper pipes, China contributes more than 65% of global output. The three-roll planetary spinning rolling (PSW) technology has become the core process for high-efficiency copper pipe production. Lucky Metal of South Korea first realized its industrial application in 1992, and China’s Kinglight Precision Copper Tube Group introduced this technology in 1994.

China’s copper pipe output data for 2023 shows the production volume of major manufacturers as follows: Hunan Xiangtou Jintian 1,829 tons, Baoti Co., Ltd. 1,346 tons, Western Materials 1,001 tons, Zhangjiagang Huayu 1,030 tons, and Changshu Ruitai 900 tons. At present, technical bottlenecks in cooling control still need to be overcome for high-end products such as high-fin thin-walled tubes.

Table 2 Characteristics of Regional Markets

Global Regional Market Characteristics

 

Analysis of the Aluminum Alloy Pipe Market

The global aluminum pipe market is large and growing steadily, with a total value of approximately RMB 112.87 billion in 2024 and an estimated compound annual growth rate of around 5%. The Asia‑Pacific region is the world’s largest consumer market, accounting for about 45% of total consumption. As a vital lightweight material, aluminum pipes are mainly used in aerospace, the automotive industry and other fields. The global aluminum pipe market features a high concentration ratio and is dominated by a small number of multinational giants such as Hydro of Norway. Hydro holds roughly 5% of the market share and enjoys prominent advantages in high value‑added segments.

China’s high‑end aluminum pipe industry has a diversified structure (Table 3). Central enterprises led by Chinalco Group play a leading role. Local enterprises including Nanshan Aluminum demonstrate strong competitiveness with international certifications. Companies such as Southwest Aluminum and Dongqing Aluminum provide solid material support for the lightweight demands of China’s domestic aerospace and automotive industries through independent R&D and design.

Table 3 Main Businesses of Relevant Enterprises

Key Domestic Aluminum Tube Manufacturers

 

Analysis of the Titanium Alloy Pipe Market

Titanium alloy pipes are key materials for aerospace and other sectors owing to their high specific strength and corrosion resistance (Table 4). The global market size stands at approximately USD 4.5 billion, with the aerospace sector accounting for as high as 62%. Around 60% of the global high-end titanium alloy market share is dominated by TIMET (USA), VSMPO‑AVISMA (Russia) and Kobe Steel (Japan).

China’s annual output of titanium pipes is about 10,000 tons, with Baoti Co., Ltd. as the leading manufacturer. In 2023, both export volume and price rose, resulting in a notable trade surplus. Nevertheless, high-grade pipes such as TA18 that enable substantial weight reduction still rely on imports. Domestic manufacturers have bottlenecks in core processes including the homogeneity of titanium alloy microstructure.

Table 4 Segmentation of Application Fields

Titanium Tube Application Fields

 

Analysis of Other Alloy Pipe Markets

Carbon steel pipes feature low cost and high strength, and are mainly used in construction and infrastructure, automotive industry, oil and gas transportation and other fields. Superalloy pipes are subjected to extreme high temperature, high pressure and severe corrosion during service, and are widely applied in aerospace, energy and power, high-end chemical industry and other sectors. Nickel-based alloy pipes are widely used in extreme environments such as nuclear power plants and supercritical power stations, with a global market size of approximately USD 8.5 billion. Composite pipes are growing rapidly in aerospace and sports equipment sectors, registering an annual growth rate exceeding 12%.

Pipe Preparation and Processing Technologies

Metal pipe fabrication processes are generally divided into two categories: welded pipe production and seamless pipe production. Welded pipe fabrication joins the edges of plates or strips by welding to form a closed cross-section, with welding technology as its core. Seamless pipe fabrication directly forms solid billets into hollow pipes via thermomechanical or mechanical methods, and its core lies in plastic deformation technology. The selection of processes depends on multiple factors including material properties, product requirements and production costs.

Welded Pipe Preparation and Processing Technologies

Welded pipes are formed by welding (Figure 1). The core process is to first roll metal plates or strips into a tubular shape, then weld and seal the longitudinal seam to form a closed pipe body. Thanks to its cost-effectiveness and high efficiency, this process has become the mainstream choice for major pipe manufacturers. Specific welding technologies are selected according to material characteristics: To guarantee corrosion resistance of weld seams, stainless steel pipes are commonly welded by gas tungsten arc welding (GTAW) with inert gas shielding or high-energy-beam laser welding. High-frequency induction welding, which is efficient and energy-saving, is widely adopted for carbon steel and copper alloy pipes. Titanium alloy pipes with high chemical activity must be welded under high-purity argon or vacuum conditions to avoid contamination. For aluminum alloy pipes, proper filler wires and shielding gas shall be carefully selected to prevent hot cracking. Although the microstructure and properties of weld zones differ from those of the base metal, welded pipes still dominate numerous fields such as building structures, fluid transportation and mechanical equipment owing to their remarkable advantages in efficiency and cost.

Welding Fabrication Process

Figure 1 Welding Fabrication Process

Seamless Pipe Preparation and Processing Technologies

(1) Rolling process.

Rolling is the core process for seamless pipe manufacturing, in which rotating rolls induce plastic deformation of metal to achieve target dimensions. Its basic principle is as follows: the pierced tube blank is fed into the deformation zone formed by two or three rolls with specified pass profiles. Together with the internal mandrel, the rolls exert cyclic pressure on the tube blank in radial and axial directions (Figure 2). During this process, under rolling compression, the wall thickness of the metal tube is reduced, the diameter shrinks, and the material elongates along the axial direction.

Fabrication of Seamless Pipes by Rolling Process

Figure 2 Fabrication of Seamless Pipes by Rolling Process

According to the deformation temperature, rolling is classified into hot rolling and cold rolling. Hot rolling is generally performed above the recrystallization temperature to efficiently reduce diameter and preliminarily fix wall thickness; it is commonly used for the breakdown of large-diameter pipe blanks. Cold rolling, with cold Pilger rolling as the most typical form, is carried out at room temperature. Through multi-pass precision rolling with small deformation, it can greatly improve the dimensional accuracy, surface finish and mechanical properties of pipes. It serves as a key finishing operation for manufacturing high-precision, high-performance thin-walled seamless pipes.

(2) Extrusion Process

The extrusion process (Figure 3) is an important hot forming method for hard-to-deform alloys. Its working principle is as follows: a heated metal ingot is placed in a closed extrusion container. Under the huge uniaxial pressure applied by the extrusion ram, the metal plastically flows through the annular die orifice composed of a die sleeve and a die mandrel. The metal deforms under a nearly triaxial compressive stress state and continuously extrudes out of the die opening, forming hollow pipes with the same cross-sectional shape as the die orifice.

A prominent feature of this process is that the metal undergoes intense shearing and compression within the deformation zone. This helps break up coarse as-cast microstructures and produces dense microstructures with uniform flow lines. The extrusion process is especially suitable for the initial breakdown forming of metals with low plasticity and high deformation resistance. It can directly produce pipe blanks with complex cross-sections or large diameters, providing high-quality intermediate products for subsequent cold working.

Fabrication of Seamless Pipes by Extrusion Process

Figure 3 Fabrication of Seamless Pipes by Extrusion Process

(3) Drawing Process

Drawing (Figure 4) is a key finishing process for pipes at room or low temperature to achieve ultra-high dimensional accuracy and excellent surface quality. Its forming principle is as follows: the end of a pre-formed pipe blank obtained by rolling or extrusion is tapered, then passed through a tapered drawing die with a gradually reduced cross-section, while a tensile force is applied at the outer end. When the tensile stress exceeds the yield strength of the pipe material, plastic deformation takes place, reducing the outer diameter and wall thickness with a corresponding increase in length.

Drawing is essentially a combined “tension‑compression” deformation dominated by tensile stress. Although the deformation per pass is small, continuous multi-pass drawing enables precise control over pipe dimensions, roundness and surface roughness, and can effectively raise the strength and hardness of the material. Therefore, drawing is a decisive process for producing small-diameter, thin-walled, high-performance precision seamless pipes.

Fabrication of Seamless Pipes by Drawing Process

Figure 4 Fabrication of Seamless Pipes by Drawing Process

 

Forming and Manufacturing Technologies for Tubular Parts

Piping systems are widely used in aerospace, new energy vehicles, energy and chemical industry, high-end equipment and other fields. Conventional processing methods can hardly meet the modern industrial requirements for lightweight, integrated, precise and customized components. Accordingly, advanced plastic forming technologies for pipes such as bend forming, hydroforming and spinning forming have emerged and developed rapidly. By precisely controlling the plastic flow of materials, these technologies can fabricate complex three-dimensional shapes while preserving or improving the mechanical properties of materials, reduce connecting joints, and realize structural weight reduction and performance improvement.

Bend Forming

Pipe bend forming (Figure 5) is a process in which bending moment is applied to induce plastic deformation of a tube blank around a specified radius, so as to produce components with required spatial features. Its core objective is to precisely control the thinning and cracking of the outer wall, thickening and wrinkling of the inner wall, and cross-sectional distortion during bending.

Main processes include push bending, press bending, roll bending and rotary draw bending. Push bending is advantageous for manufacturing large-diameter pipe parts with a small bending radius, overcoming the limitation of other processes that cannot achieve small bending radii. Press bending features a small contact area between the pipe and die without relative sliding, exerting minimal impact on the surface quality of tube blanks, and is suitable for parts with high surface requirements. Roll bending is capable of forming pipes with special-shaped cross-sections. Rotary draw bending boasts a high degree of automation; it can automatically complete bending operations according to preset programs, which not only improves production efficiency but also ensures stable and consistent product quality.

Pipe bend forming is an advanced method for manufacturing tubular components with complex spatial structures (Figure 6) applied in aerospace, automotive industry, ship transportation and other sectors.

Pipe Bend Forming Process

 

 

Figure 5 Pipe Bend Forming Process

Pipe Bend Formed Parts with Different Features

 

Figure 6 Pipe Bend Formed Parts with Different Features

Hydroforming

Hydroforming uses liquid as the pressure-transmitting medium to realize integrated pipe forming with the cooperation of special tools and dies. Compared with the conventional method of welding two half-pipes together, this technology offers advantages such as reduced component weight, improved strength and stiffness of parts (especially fatigue strength), higher dimensional accuracy, fewer forming operations and dies, and lower production costs.

Conventional hydroforming cannot form tubular parts with complex structures and large cross-section variation rates. Therefore, based on pipe hydroforming processes, the Institute of Metal Research, Chinese Academy of Sciences, has further developed a variety of advanced forming technologies, including pulsating hydroforming, hydraulic flexible forging, combined internal-external pressure forming and others (Figure 7).

New Hydroforming Processes for TubesFigure 7 New Hydroforming Processes for Tubes

Pulsating hydroforming adopts electric and hydraulic control technologies on the basis of conventional linear monotonic loading, so that the forming pressure inside the tube fluctuates with periodic loading and unloading over time.

In hydraulic forging forming, the tube is filled with liquid medium to provide supporting internal pressure. Both ends of the tube are sealed by left and right punches. The internal pressure is adjusted by injecting flexible liquid, and a rigid mechanism applies local loading on the workpiece, forcing the tube to yield and deform to fit the die.

Combined internal‑external pressure forming applies high‑pressure liquid to the inner and outer surfaces of the tube respectively to realize synchronous or asynchronous deformation of single‑layer or multi‑layer tubes. By reasonably controlling the internal pressure and axial feeding, the tube blank fits the die, and parts with the required complex shapes are finally obtained. Hydroformed tubular parts are shown in Figure 8.

Hydroformed Tubular Parts

Spinning Forming

Spinning forming (Figure 9) is a process in which a rotating die drives the tube blank, and rolling elements in local contact apply pressure to induce continuous, progressive plastic deformation of the material. It is mainly divided into conventional spinning, which focuses on wall thickness reduction, and shear spinning that can realize diameter variation simultaneously.

During forming, the material is subjected to triaxial compressive stress, so parts with dense microstructure and excellent performance can be obtained (Figure 10). This process is especially suitable for manufacturing large‑diameter thin‑walled revolving components from hard‑to‑deform materials such as titanium alloys. It holds an irreplaceable position in the fields of aeroengine casings, missile shells and high‑pressure vessels.

Tube Spinning Forming Process

 Figure 9 Tube Spinning Forming Process

Spun Tubes with Variable Cross‑Section Structural FeaturesFigure 10 Spun Tubes with Variable Cross‑Section Structural Features

Other Processes

Apart from the mainstream technologies mentioned above, various special forming processes cater to the demands of specific scenarios. Necking and flaring processes are dedicated to adjusting the dimensions of tube ends for convenient connection. Electromagnetic forming adopts high‑energy pulsed magnetic fields to achieve high‑speed precision forming of metals and can effectively suppress springback. Thermal stress forming reduces the deformation resistance of hard‑to‑deform materials by heating, enabling the forming of complex components. Collectively, these processes expand the boundaries of pipe processing and serve a wide range of sectors from pipeline engineering to cutting‑edge equipment.

Future Development Directions of Pipes and Fittings

Pipe technology will accelerate its transformation toward intelligence, precision and greenness in the future. In terms of intelligent manufacturing, the industry will shift from independent forming processes to full‑chain intelligent integration covering “design – material – process – inspection”. This transformation aims to build an intelligent manufacturing system driven by digital twins and artificial intelligence. By breaking down the “data silos” between traditional links, fundamental changes can be realized across the industry. At the design stage, algorithm‑based integrated forward design and optimization of “structure‑material” will be realized. At the process stage, high‑fidelity finite element simulation and online sensing data will support adaptive closed‑loop control to ensure accurate and stable forming. At the inspection stage, machine vision and other technologies will enable online quality prediction and diagnosis. Ultimately, a full‑chain data loop with self‑learning and decision‑making capabilities will be established, greatly improving R&D efficiency, quality consistency and manufacturing flexibility.

In terms of material system expansion, the focus lies on multi‑material compatible processes to meet the high‑efficiency rolling requirements of hard‑to‑deform materials such as titanium alloys and zirconium alloys. Function‑integrated materials promote the integrated development of “structure and function”, while sustainable materials including recycled metals and high‑performance composite materials will be widely adopted.

In the field of standardization and data sharing, it is necessary to establish a database correlating “process – microstructure – performance”, formulate advanced international standards, and build open innovation platforms to facilitate the transformation of technological achievements.

Emerging application fields bring broad prospects for the pipe industry. In the new energy sector, demand for hydrogen storage and transportation pipelines is robust. The electronic information industry imposes stringent requirements on ultra‑high‑purity pipes for semiconductor equipment. The biomedical sector drives the development of precision pipes for implantable medical devices. The energy conservation and environmental protection sector focuses on the innovation of microchannel pipes for high‑efficiency heat exchangers. The demand for industrial upgrading is also prominent: the lightweight trend in aerospace pushes weight reduction requirements for new‑generation aircraft; the pursuit of higher energy efficiency fuels the market for high‑temperature‑resistant pipes used in supercritical power generation units; infrastructure upgrading drives the renovation of urban pipe networks; and consumption upgrading expands the application in high‑end home appliances and consumer goods. These opportunities call for continuous innovation in pipe manufacturing technologies to match the high‑end and customized market trends.

Conclusion

Pipe manufacturing technology is undergoing profound changes, with precision, intelligence and greenness as the dominant directions. Pipes made of titanium alloy, aluminum alloy, copper alloy, superalloy and other materials are widely used in high‑end sectors such as aerospace and energy. Nevertheless, core challenges including texture control and cooling uniformity remain to be addressed. Interdisciplinary innovation combining materials science, digital technology and advanced processes is expected to realize high‑performance and low‑cost pipe manufacturing. Future priorities are to tackle difficulties such as microstructure regulation and process stability, and promote the industry’s transition from experience‑driven to data‑driven development.

For enterprises, it is advisable to increase R&D investment, make breakthroughs in core technologies, advance intelligent manufacturing upgrading, raise production efficiency, strengthen industrial chain coordination, foster an innovation ecosystem, expand high‑end application fields and improve product added value. Research institutions should reinforce basic theoretical research, tackle common technical problems, promote industry‑university‑research cooperation, accelerate achievement transformation, and cultivate interdisciplinary talents to support industrial innovation. Government authorities shall formulate industrial policies to guide sound industrial development, support the construction of innovation platforms, boost technical exchanges, improve the standard system, enhance international competitiveness, strengthen international cooperation and integrate into the global innovation network. The joint efforts of the three parties will help the pipe industry build a sustainable development pattern.