What should we pay attention to in terms of safety during forging processing?

During the forging process, in terms of safety, we should pay attention to:
1. forging production is carried out in the state of metal burning (for example, 1250~750℃ range of low carbon steel forging temperature), because of a lot of manual labor, accidentally burning may occur.
2. The heating furnace and charred ingot, blank and forgings in the forging shop constantly emit a large amount of radiant heat (the forgings still have quite high temperature in the final forging), and the workers are often harmed by radiant heat.
3. Smoke and dust discharged from the heating furnace of the forging workshop into the air of the workshop not only affects health, but also reduces the visibility of the workshop (for the heating furnace burning solid fuel, the situation is more serious), so it may also cause industrial accidents.
4. forging production equipment, such as air hammer, steam hammer, friction press, etc., will produce impact when working. When subjected to this impact load, the equipment itself is prone to sudden damage (such as forging hammer piston rod sudden fracture), resulting in serious injury accidents.
Punch press (such as hydraulic press, crank hot forging, flat forging machine, precision forging machine, etc.), while working, the impact is small, but the sudden damage of the equipment also happens from time to time, the operator is often caught off guard, and even may cause industrial accidents.

5. forging equipment in the work of the force is very large, such as crank press, forging machine and hydraulic press, their working conditions although relatively smooth, but the working parts of the pressure is also very large, for example, China has been manufactured and used 12000 tons of forging equipment. Ordinary 100~ 150T punch, the release of the force is enough. If there is a slight error in the installation or operation of the mold, most of the force will not be applied to the workpiece, but to the parts of the mold, tool, or equipment itself. In this way, some installation and debugging errors or improper tool operation can lead to the damage of machine parts and other serious equipment or human accidents.
6. Blacksmiths 'tools and AIDS, especially hand and free forging tools, clamps, etc., are well known for being put together and working together. In fortification, tools are frequently changed and stored in disorder, which inevitably increases the difficulty of checking these tools. When a certain tool is needed in fortification, sometimes it cannot be found quickly, sometimes it cannot be found in time, and sometimes similar tools are "made do", which often leads to industrial accidents.
7. Because of the noise and vibration generated by the equipment in the operation process of the forging workshop, the workplace is very noisy, which affects people's hearing and nervous system and distracts people, thus increasing the possibility of accidents.
The above is some of the problems to pay attention to in the forging process, you can know, have any questions and needs, you can contact us directly, or directly leave your needs and contact information on the website, we will contact you in time!